Papercraft
The Stormtrooper Helmet: Pepakura Files for a Star Wars Fan
A Star Wars fan's papercraft collection, built around the First Order Stormtrooper helmet and the full armour, with more helmets and figures.
- Papercraft
- Archived
- 2 min read
I grew up with Star Wars, and I am a huge fan. I always wanted a Stormtrooper helmet of my own. This is the collection of papercraft files that goes with that wish.
Archived project
The GitHub repository for this project is archived: it is read-only and no longer updated. What follows describes the project as it was, so check for a newer alternative before you build it.
The helmet
The heart of the collection is the Stormtrooper helmet, the First Order version. It is in the repository twice: as a Pepakura file, Helmet (SW7).pdo, in the Stormtrooper armour folder, and as a printable PDF, First Order Storm trooper helmet_resized_A4.pdf, resized to fit A4 paper.
The helmet is only the start. The same folder holds the whole set of armour, so a helmet can grow into a full costume.
I built the models myself, from paper and wood glue.
What Pepakura is
Pepakura is papercraft: a 3D model is unfolded into flat pieces that you print, cut out, fold and glue together, until you have the shape in paper. The .pdo files in this repository are the files that Pepakura Designer, the program that does the unfolding, opens. A PDO gives you the printable pattern, and from there it is scissors, folds and glue.
The Stormtrooper armour
The folder called Star Wars 7 – Stormtrooper Armour Complete has a file for each part of the armour, and one for the whole set:
| File | Part |
|---|---|
| Helmet (SW7) | The helmet |
| Chest | The chest plate |
| Back | The back plate |
| Arm | The upper arm |
| Forearm | The forearm |
| Shoulder and Hand plate | Shoulder and hand |
| AbPlate | The abdomen plate |
| Belt and accesories | The belt and its accessories |
| Crotch and Butt plate | The crotch and rear plates |
| Thigh and Knee | The thigh and knee |
| Shin and Ankle | The shin and ankle |
| E-11 Blaster | The blaster |
| ARMOUR COMPLETE | The complete set in one file |
More in the repository
Next to the Stormtrooper there are more helmets and figures, in their own folders:
| Folder | Contents |
|---|---|
| Star Wars 7 – Kylo Ren Helmet | The Kylo Ren helmet, in three versions |
| Star Wars 7 – Phasma | Captain Phasma |
| Star Wars 7 – Flame Trooper | A Flame Trooper helmet |
| Star Wars 7 – Tie Pilot helmet | A TIE pilot helmet |
| Star Wars 7 – X-Wing pilot Helmet | An X-Wing pilot helmet |
| Star Wars 7 – BB8 | BB-8, small and life size |
| Iron Man – Helmet Mark VI | The Iron Man Mark VI helmet, with a tester version |
| Game Of Thrones – Strak Direwolve | A Stark direwolf |
Good to know
- This is a fan project. Star Wars, the Stormtrooper and the other characters and designs belong to their owners, and this page is not connected to them.
- The repository has no README and no licence, and it does not say who designed the models. If you know the original designers, credit them when you share your build.
- The repository dates from early 2016. It was created on 27 January 2016 and last updated on 18 February 2016, with a change called “Resized”.
Everything is in the Pepakura repository on GitHub.
Related
Software
ESP32 WS2811 LED Strip Driver
A driver for WS2811 RGBIC LED strips on the ESP32, using the RMT peripheral to drive a strip from one data line.
Read more
Electronics
0.91-inch OLED Display on an ATtiny85
The ATtiny85 is a compact and low-power microcontroller ideal for minimalist electronics.
Read more
Software
ESP32 DHT Driver for ESP-IDF
A driver for DHT11, DHT22 (AM2301) and Si7021 temperature and humidity sensors on the ESP32, packaged as an ESP-IDF component with an example.
Read more
More projects
Keep building.
Electronics, 3D printing and CNC builds, documented from the first idea to the last screw.
All projects